roping and sheeting

[punchy_dan]

Bewick:

Punchy Dan:
0A nice tight sheet & no ropes

What a [zb] you are Dan’l ! But at least we were never reduced to running around with a mobile Yurt What a [zb] abortion !

Well Denzil we are a specialist operation that leave general haulage to those who wish to participate in such things

[bewick]

[punchy_dan]

How do stretched units go on with Ackermans angle does it turn them in to a pig in a poke ? Or do adjustments need to be made ?

[paul_john]

Dan. Your curtain sided, roll tarp, roll
on roll off unit is spot on.
How is the trailer coming along?

[punchy_dan]

Paul John:
Dan. Your curtain sided, roll tarp, roll
on roll off unit is spot on.
How is the trailer coming along?

Hi Paul John thank you ,I sold the trailer to my brother to go behind a new tractor unit crane he’s got coming as the job I bought it for a customer of 23 plus yrs who made generators has been poorly managed by new management over the last 2 yrs and the owners a stock market group have pulled the plug on them unfortunately cheers Dan.

[jakdaw]

Back in the day I used to see a Currie/ Shamrock Ex artic leaving Huddersfield with a load of wool
on the trailer always looked the business.

[ramone]

facebook.com/watch/?v=931006537725101
Maybe of interest

[bewick]

Ran on nights from Dunstable depot to the North West and back ! Shot taken at Milnthorpe.

[atlas_man]

Bewick:
0
Ran on nights from Dunstable depot to the North West and back ! Shot taken at Milnthorpe.

That’s a fair run Dennis I used to do Leeds to Dunstable for Atlas Express

[bewick]

atlas man:

Bewick:
0
Ran on nights from Dunstable depot to the North West and back ! Shot taken at Milnthorpe.

That’s a fair run Dennis I used to do Leeds to Dunstable for Atlas Express

Hiya Atlas man, The run was mainly into Radcliffe or Irlam and back but now and again it was straight to Milnthorpe and return. In the late 70’s we had a small depot at Hockliffe and we ran a nightly trunk from Milnthorpe ( using a 5 speed Day cab 111) we also ran a couple of trunks for many years to Daventry and back and that was operated with ■■■■■■■ 220 Atky’s and 180LXB /240LXB “A” Series ERF’s plus a couple of day cab 8LXB Sed Atks later on.
Those were the days ! Cheers Dennis.

[punchy_dan]

[lawrence_dunbar]

Punchy Dan:
0

Hi Dan, A very neat bit of sheeting there my friend, Take care & stay safe & Keep up the good old work programe, Regards Larry.

[punchy_dan]

Lawrence Dunbar:

Punchy Dan:
0

Hi Dan, A very neat bit of sheeting there my friend, Take care & stay safe & Keep up the good old work programe, Regards Larry.

Hi Larry thank you & you too regards Dan .

[stargazer148]

Neat and tidy Dan to tall for the curtainsider cheers Ray

[gazsa401]

Punchy Dan:

Lawrence Dunbar:

Punchy Dan:
0

Hi Dan, A very neat bit of sheeting there my friend, Take care & stay safe & Keep up the good old work programe, Regards Larry.

Hi Larry thank you & you too regards Dan .

Hey up Dan I’ve tried to pm you but for some reason it won’t send any ideas moderaters ?

[punchy_dan]

stargazer148:
Neat and tidy Dan to tall for the curtainsider cheers Ray

Thanks Ray I can get 2.6 m in .

[punchy_dan]

I’ve just told these 2 drivers from Aberdeen what Berwick may say about their handy work they said they will look here later as they are running south from here in Motherwell and have got a spare sheet they could wrap a mans body in

[bewick]

Well dan’l I will assume that you are referring to A.N. Other firm as the the spelling of my Company name dosen’t contain an “r” in it, however I can well imagine what those two Aberdonian Lads said to one another when they clapped eyes on your outfit something like " Wee’s the J. Arthur on the antique Foden"

[kempston]

Punchy Dan:
01
I’ve just told these 2 drivers from Aberdeen what Berwick may say about their handy work they said they will look here later as they are running south from here in Motherwell and have got a spare sheet they could wrap a mans body in

All that money on a nice new lorry and paint job then have a sheet with a big hole in it!

[punchy_dan]

my green sheet is 30 yrs old it was ordered the wrong size for an 8 wheeler bulk tipper