@Dennis how about getting a demountable
cattle box built and have the flat bed modified
so it can carry the box,but drop it off when empty
and do flat bed work as and when you need it,
if the costs and work is there, this what we had
to a 12m trailer as a experiment and then the Boss
had small trailers built for 20ft containers so we
could reload steel out of Italy back into Germany
My bank are the proud owners of these three:
This one makes the wood chips…
These two deliver them…
brit pete:
@Dennis how about getting a demountable
cattle box built and have the flat bed modified
so it can carry the box,but drop it off when empty
and do flat bed work as and when you need it,
if the costs and work is there, this what we had
to a 12m trailer as a experiment and then the Boss
had small trailers built for 20ft containers so we
could reload steel out of Italy back into Germany
We used to operate demountable cattle boxes on flatbed wag&drags.
I haven’t got any pics to hand of one with a cattle body on 
Ex Haulier:
that’s good to know, it did cross my mind that the cows might fall off !.
brit pete:
@Dennis how about getting a demountable
cattle box built and have the flat bed modified
so it can carry the box,but drop it off when empty
and do flat bed work as and when you need it,
if the costs and work is there, this what we had
to a 12m trailer as a experiment and then the Boss
had small trailers built for 20ft containers so we
could reload steel out of Italy back into Germany
Most cattle boxes are like that already Pete
here’s some old pictures
edit to add: Of course I’m talking about Rigids/W & D outfits here as artic trailers are usually built on a trailer chassis 
brit pete:
@Dennis how about getting a demountable
cattle box built and have the flat bed modified
so it can carry the box,but drop it off when empty
and do flat bed work as and when you need it,
if the costs and work is there, this what we had
to a 12m trailer as a experiment and then the Boss
had small trailers built for 20ft containers so we
could reload steel out of Italy back into Germany
Denis F:
Most cattle boxes are like that already Pete
Now then Pete, I think Denis is saying that he already has a Wechselbrücke.
ta very much, for the German lesson Dave do you not mean a demountable box,trailer, container ,■■?
wood fuel:
My bank are the proud owners of these three:This one makes the wood chips…
These two deliver them…
I must say Wood Fuel, that’s a very impressive set up you have there. What do you do with the woodchip or what do the factories do with it? If you don’t mind me asking?
brit pete:
ta very much, for the German lesson Dave do you not mean a demountable box,trailer, container ,■■?
Well Pete, I’ve re-read my post and I’m afraid I can’t see where I’ve tried to give you a lesson on anything.
Yes Pete, of course I mean that it’s a demountable body.
I reckon that you already know perfectly well that I said exactly that at first.
busyboy:
I must say Wood Fuel, that’s a very impressive set up you have there. What do you do with the woodchip or what do the factories do with it? If you don’t mind me asking?
The wood chips are boiler fuel - heating for schools, leisure centres, offices, hotels, big country houses and the like. Look at http://www.wood-fuel.co.uk
To see the chipper in action - http://www.youtube.com/watch?v=kAiTYQmnsvs
That terminator thingy is coool! Grab 360, chipper and wagon all in one! The Grinder must be meaty as schizel as well to chip full on trees. Now I bet that set up cost you a fortune. Nicely turned out dude.
Silver_Surfer:
That terminator thingy is coool! Grab 360, chipper and wagon all in one! The Grinder must be meaty as schizel as well to chip full on trees. Now I bet that set up cost you a fortune. Nicely turned out dude.
Thanks Silver. It’s all very specialist kit so yes, it has cost an arm and a leg. The blower trucks use the same principle as feed blowers, but the blower units and the rotary valves are much bigger.
The chipper has its own 400 hp engine and it does make your ears ring. Don’t know if you noticed, but its on a hook lift skid. When we’re not chipping, we can use the wagon as a tipper with a box body, and to pick up logs with a log carrier body. Three trucks in one. Handy.
wood fuel:
Silver_Surfer:
That terminator thingy is coool! Grab 360, chipper and wagon all in one! The Grinder must be meaty as schizel as well to chip full on trees. Now I bet that set up cost you a fortune. Nicely turned out dude.Thanks Silver. It’s all very specialist kit so yes, it has cost an arm and a leg. The blower trucks use the same principle as feed blowers, but the blower units and the rotary valves are much bigger.
The chipper has its own 400 hp engine and it does make your ears ring. Don’t know if you noticed, but its on a hook lift skid. When we’re not chipping, we can use the wagon as a tipper with a box body, and to pick up logs with a log carrier body. Three trucks in one. Handy.
Pictured before delivery at West Pennine Trucks Telford
HOW DO YOU ATTATCH PICCYS■■?
upload them onto a photo hosting website such as www.photobucket.com then click the ling and paste it in here
Welshman:
Heres mine s700.photobucket.com/albums/ww2/ … nt=032.jpg
if you put the tags round it, s700.photobucket.com/albums/ww2/ … nt=032.jpg
or even click and copy the bottom IMG link on the photo
becomes
Any more pictures anyone?
removalboy:
Do you have 3 at the moment?
5 i counted there…
Guess who ?