Correct , i know that model .
But what i look is a real english our scottish company who has pull this type of tiptrailer.
the 141 looks the biz kfs (kitform serrvices ) do a head board or the old italeri accs box just to add the final touch
well done
david
DAVID CASSIN:
A COUPLE OF DECALS AND SOME LIGHTS AND POSS A MICHELIN MAN AND YOUR FINISHED
ITS A NICE MODEL LOOKS GOOD
MODELLTRUCKSANDPARTS.AT HAS A LOAD OF EXTRAS IN 1/24TH SCALE FOR MERC,SCANIA,VOLVO,DAF ETC
KIT FORM SERVICES ALSO DO SOME NICE ACCS
M&G MOULDINGS ALSO DOES ACCS
CHK OUT TRAPLET.COM AND CHK THE TRUCK MODEL WORLD PART,ALL ABOUT TRUCK MODELS
CHEERSDAVID
Cheers David, i have been after a few extras but never knew where to get them. I was going to get the italeri extras ■■?
yes its a great site and some great stuff on it,his air con units are cheaper than kfs’s although he stocks them also
chk the jc lescreiner stuff .grab a cuppa and sit down and chk out all the parts of the site.
cheers glad to help
www.decalprint.de also has some great decals for the 1/50 1/24 and some 1/87
Another blast from the past…
I GOT MY DECALS AND ALONG WITH THE 142 THERE WAS VARIOUS 141/111/81
WELL WORTH A LOOK
WWW.SCALEPRINT.NL
WOLFIE HE HAS DECALS FOR THE OLD F10/12
Yeah cheers Dave, but aren’t they all 1/50?
Henry, reference the dump trailer, Kings from Scotland used similar types although the livery was the same as the Tarmac colours I used for the Leyland Buffalo seen below. E.E.C Quarries also used them but I’m not sure of the colours, I have a Black and White picture that shows either a White or Yellow cab and possibly Red body. I also remember ARC used them. The trailers were mainly used in Quarry work. However in this country they would not have been used with a bonneted tractor, during the time of their use the UK truck was mainly forward control or cab over engine (coe) to use the American term. Our conventional type tractors were used on heavier work, Scammells, Thornycrofts etc. Franky.
Frankydobo:
Henry, reference the dump trailer, Kings from Scotland used similar types although the livery was the same as the Tarmac colours I used for the Leyland Buffalo seen below. E.E.C Quarries also used them but I’m not sure of the colours, I have a Black and White picture that shows either a White or Yellow cab and possibly Red body. I also remember ARC used them. The trailers were mainly used in Quarry work. However in this country they would not have been used with a bonneted tractor, during the time of their use the UK truck was mainly forward control or cab over engine (coe) to use the American term. Our conventional type tractors were used on heavier work, Scammells, Thornycrofts etc. Franky.
If that Leyland is a model then you did an excellent job of weathering it. 
Lonewolf Yorks:
Another blast from the past…
Sorry to be pedantic but, the registration on this should be a bit older, that’s a MK1 F12 judging by the round tanks, the last of them would’ve been on an A plate, still it’s a good job & much better than my cornflake packet & loo roll efforts 
LOL yes its now an X reg.
wolfie he has them in 1/50 and 1/24 scales 6.19 euro plus (2 postage approx)
cheers
david
heres a few pictures of the next build im starting soon as i finshed the seddon atkinson. its the emhar bedford ob kit with the tank from the italeri opal blitz fire truck.
and finally a picture of how i want it to roughly turn out.
NICE ONE I LOOK FORWARD TO SEEING THIS.I SEEN A FEW NICE OLDIES TODAY INCLUDING ONE OF THESE OLD BEDFORDS
THEY COMPANY SEAN BENTLEY HAS JUST RESTORED A HINO HE (LIKE THE ONE MY OLD MAN DROVE) A COUPLE OF 141S AND HAS ANOTHER FEW 142S/143S AND AND AISTRALIAN 141 TO DO.ALL DONE UP FROM SCRATCH.MY CAMERA WOULD WORK TODAY SO WILL GET SOME PICS OF PAUL MCDONALD ALSO ON THIS FORUM.
well done a bit of work on it this weekend. most on the blitz tank. not the snuggust fit of parts!. the bits that ive done on the bedford are completely the opposite.
how is the hino coming along david?.
hi pete i haven’t started it.i have started an r series scania so hope to get this finished in the next couple of weeks.
i think the decals i got might be a bit big ,if so i have an old globetrotter i can do and paint it up in the crosbie colours.
another guy i get decals off will do me up a set.
i hope to start it in octoberish
A few models from me.
Seddon-Atkinson 6x2
Collett,s 146 Scania LT 8x4.
Just a quick question guys, is the new Italeri truck accessory kit #3854 in shops yet?
NO NOT SO FAR NOBODY KNOWS WHAT IT LOOKS LIKE YET OR WHATS IN IT.THE DUM/GRAVEL TRAILER IS FINALLY OUT
32.50 EURO FROM HEINZ AT MODELLTRUCKANDPARTS.AT
I HOPE ITS A GOOD ACCS BOX
OK so here is my well loved FL10.
I had about given up hope of ever building this one but I was lucky to get a transkit off a kind person.
It would be fair to say that this build was errr ‘challenging’ in places lol. I haven’t added the air deflector cos although its included in the transkit, none of the surrounding parts are nor do the donor kit parts fit so I’ve left it off. I need to add some susies and she’ll do. I had a bit of trouble with the paint job and the pinstripes are too thick so it’ll never be a show winner but I have a model of my truck.
Its a bit poignant cos Jim Beresford who I promised this model to for years died in March and didn’t see it. RIP mate.