"Heavy Haulage through the years"

Punchy Dan:
01
A Daf moving a cherry picker from Lincoln to Lancashire via woodhead weighing in at 150 tonnes :open_mouth:

I thought that looked familiar, my old regular stamping grounds for 3 years from '96 to '99, then I upped sticks for here. But I had one more trip over memory lane with Gauthier’s. 2 drops Rotherham and Halewood, via Woodhead. :wink: :smiley:

But the memory was marred a bit by a delay in leaving St. Front, due to some repairs needed to the unit. Result was that I tipped early evening at Halewood, instead of late morning, and, out of hours, parked up in a petrol station nearby. The plan had been to get to a pub near Leicester for the night and meet up with a lot of old friends in the petanque world. :frowning:

pv83:

Punchy Dan:
01
A Daf moving a cherry picker from Lincoln to Lancashire via woodhead weighing in at 150 tonnes :open_mouth:

Don’t upset the good folks out of Kendal now Dan! :laughing:

Does the trailer extend?

Who me :laughing: he no like it when someone is bigger or better ,well I can confirm I wear small size boxers and hat too :open_mouth: :laughing: :wink:

Punchy Dan:

pv83:

Punchy Dan:
01
A Daf moving a cherry picker from Lincoln to Lancashire via woodhead weighing in at 150 tonnes :open_mouth:

Don’t upset the good folks out of Kendal now Dan! :laughing:

Does the trailer extend?

Who me :laughing: he no like it when someone is bigger or better ,well I can confirm I wear small size boxers and hat too :open_mouth: :laughing: :wink:

Well I’ve oft’ heard sparrows ■■■■■■■ before over the years and these two are certainly still ■■■■■■■ loud and clear to-day ! :blush: :unamused: :laughing: :laughing: :laughing: I reckon the Mods should move this post to the “Skate Board” thread ----150 ton-- :confused: — more like 15 ton top whack ! :laughing: :laughing:

Random shot of Heanor’s, Buzzer

201241160_2185654598242125_9132637498338356858_n (2).jpg

Hi Dennis…Bewick skins :open_mouth:have you checked your atki recently. Nice to see though :smiley: Cheers Ray

hi Dan you’ve got that cradle well marked nice to see it done properly cheers Ray

stargazer148:
hi Dan you’ve got that cradle well marked nice to see it done properly cheers Ray

Cheers Ray we always try to keep legal un like others :open_mouth: :blush: :wink:

Punchy Dan:

stargazer148:
hi Dan you’ve got that cradle well marked nice to see it done properly cheers Ray

Cheers Ray we always try to keep legal un like others :open_mouth: :blush: :wink:

:laughing: :laughing: :laughing: you owe me a new brew Dan!

Bewick:
0

Nicely sheeted! That special paint on the back of the cab, is that from Peaky Blinders ?

Sarens coming through with their MOL plated for 250t.

pv83:

Punchy Dan:

stargazer148:
hi Dan you’ve got that cradle well marked nice to see it done properly cheers Ray

Cheers Ray we always try to keep legal un like others :open_mouth: :blush: :wink:

:laughing: :laughing: :laughing: you owe me a new brew Dan!

Any time :laughing:

pv83:

DEANB:
Reckon Patrick has gone “AWOL” :unamused:

You’re not going to believe this mate, but I’ve been busy working my arse off! No rest for the wicked eh! :wink:

Aussie interpretation “Flat-out like a lizard drinking.” :sunglasses: :sunglasses: :unamused: :wink:

Dig

This was a load of probably 150tons not sure what happened but tend to think a malfunction in the engine dept attempt to tow the unit up the jump up tow rope broke and this was the end result after runaway backwards downhill with little steering power :neutral_face: :neutral_face: :neutral_face: :neutral_face: :wink: :wink:

Dig

pv83:
This was a record breaking move, although I forgot what the weight was… :blush:

A move like that would be done by SPMT’s nowadays, the technical solutions really took a flight in the past 30 years.

Nice pics Patrick. :smiley: Thats some line up of trucks.

Heres another pic of it.

hh econ 87.PNG

Just the one, Buzzer

Buzzer:
Just the one, Buzzer

It looks like that’s seen some life Buzzer :laughing:

DIG:

pv83:

DEANB:
Reckon Patrick has gone “AWOL” :unamused:

You’re not going to believe this mate, but I’ve been busy working my arse off! No rest for the wicked eh! :wink:

Aussie interpretation “Flat-out like a lizard drinking.” :sunglasses: :sunglasses: :unamused: :wink:

Dig

:laughing: :laughing:

DIG:
This was a load of probably 150tons not sure what happened but tend to think a malfunction in the engine dept attempt to tow the unit up the jump up tow rope broke and this was the end result after runaway backwards downhill with little steering power :neutral_face: :neutral_face: :neutral_face: :neutral_face: :wink: :wink:

Dig

That doesn’t look too pleasant mate! Sort of reminds me of a clip I’ve seen on Facebook, couple of well used pullers (this takes place in the Middle East I reckon) are trying to get up a steep hill, last one is a Merc as suddenly the tow bar breaks off and the Merc with the load is going backwards again rapidly without effective braking! Why they didn’t had some units at the back puzzles me… I’ll try to find it and post the link on here.

DEANB:

pv83:
This was a record breaking move, although I forgot what the weight was… :blush:

A move like that would be done by SPMT’s nowadays, the technical solutions really took a flight in the past 30 years.

Nice pics Patrick. :smiley: Thats some line up of trucks.

Heres another pic of it.

0

Cheers Dean. Don’t reckon we’ll see the likes of that again!