Have a Daf Euro 106 17 plate and I am looking to put an air duster in. Problem is I can’t find where to connect one. Attached picture of my drivers seat base. Looked at back of seat and there is an airline that has been cut previously but no t piece etc. Pipes look about 4 mm.
The hole in side is where I presume there should be a connection for air line?
Any help anyone.
Unscrew the plastic trim in front of level control and scuff panel , seat air pipe is under there about where the cross is
Ah ok… that’s where my tipper control valve is. Would the airline be under there then?
stuart75:
Ah ok… that’s where my tipper control valve is. Would the airline be under there then?
Yep
Looks like I will have to get mechanic to do it… tried today but plate holding control for tipper bolted in through side plate in base of seat. Can’t seem to get in to take it off even with seat fully up… on the positive side I found the airline…
Yup.
I have a 69 plate XFSSC, and the outlet is on the seat base facing the door.
I will take a pic on Monday.
Ken.