volvo fh 12 2005 . front bumper

Anyone know how hard it is to fit a front bumper to my volvo?

Not difficult at all.
Give all the screws a spray with some easing oil first, then arm yourself with a decent quality ratchet and torx drives.
If you can, draw a rough sketch of the bumper on a piece of card, then as you remove a screw push it through the card in the position you took it from. so refitting the correct screws in the right places is easy.

Make sure it’s the same colour as the old one or the boss might notice when you get back :wink:
Regards. John.

Thanks for the information cheers, and it’s the same colour as it’s my own truck . Hopefully all screws come loose ok.