Just as title says, anyone got any ideas where the fuse/relay is on a 13plate scania tipper. Had a quick check under the panel in the compartment on the dash but had no luck, doesn’t tell me much on the fuse layout diagram either, only muck shifting but don’t fancy running with no sheet on.
Probably in the battery box, have a check there.
Checked there, nothing
Check along the chassis should be a plastic box with a reset button for the circuit breaker it can trip if you hold the switch too long when retracting the sheet, also there is a fuse inside the box some times the sheet motors burn out,we seen to get through a few!
Normally around the battery box it’s not normally the fuse but the trip switch. Tiny black plastic switch. If still no joy, follow the conduit from the sheet motor down the headboard, I had the trip on a Foden at the base of the headboard.
Is there a clicking noise when you press the sheet? If so it could be the motor knackered. No noise is usually the trip.
When you wiggle the cable about inside the plate on the headboard it sometimes clicks but doesn’t move the sheet other times nothing