Renault Magnum codes

UK PROFESSIONAL DRIVERS FORUMS OWNER AND FLEET OPERATORS FORUM (INTERACTIVE)
1

Just wondering if anyone knows the eight digit code required to access the information menu on the Renault Magnum?

Thanks in advance

2

Welshman:
Just wondering if anyone knows the eight digit code required to access the information menu on the Renault Magnum?

Thanks in advance

What 8 figure code :question: - A Dxi Magnum has a 6 figure code to turn the immobiliser off :question:

Steve

3

neversweat1:
What 8 figure code :question: - A Dxi Magnum has a 6 figure code to turn the immobiliser off :question:

Steve

How would you find out what the code was for a specific DXI Magnum?

PM me if you prefer.

4

neversweat1:

Welshman:
Just wondering if anyone knows the eight digit code required to access the information menu on the Renault Magnum?

Thanks in advance

What 8 figure code :question: - A Dxi Magnum has a 6 figure code to turn the immobiliser off :question:

Steve

Sorry Steve I think that’s the code I’m referring. To
Regards
Tony

5

Welshman:

neversweat1:

Welshman:
Just wondering if anyone knows the eight digit code required to access the information menu on the Renault Magnum?

Thanks in advance

What 8 figure code :question: - A Dxi Magnum has a 6 figure code to turn the immobiliser off :question:

Steve

Sorry Steve I think that’s the code I’m referring. To
Regards
Tony

If its a Dxi you can access everything through the menu and up and down buttons on the radio column controls.
In experts you can see any “live” fault codes on the ecu’s
Steve

6

neversweat1:

Welshman:

neversweat1:

Welshman:
Just wondering if anyone knows the eight digit code required to access the information menu on the Renault Magnum?

Thanks in advance

What 8 figure code :question: - A Dxi Magnum has a 6 figure code to turn the immobiliser off :question:

Steve

Sorry Steve I think that’s the code I’m referring. To
Regards
Tony

If its a Dxi you can access everything through the menu and up and down buttons on the radio column controls.
In experts you can see any “live” fault codes on the ecu’s
Steve

Thanks has the Truck got to go into the Dealer to have them cleared?

7

Don’t know specifically for Magnum but you can often clear codes from the dash accessible diagnostics with a hard battery reset which is cheaper than a dealer. Make sure you’ve got any security/radio codes before you start though.

8

Inactive codes go off by themselves - Some ad-blue and fuel faults will leave the yellow “puffer” light on that will need plugging in and clearing even if they are inactive.
If you an intermittent fault on say the EBS when it does it you can access the diagnostic mode -select the EBS ecu and note the code - multiple codes are read by going up and down with the radio volume control buttons on the steering column.
Steve :smiley: