i need truckers atlas, steering wheel aid( knob for one hand turning)
need a voltage dropper from 24 volts down to 12 volts. need a timer stop clock big time for 4 and a half hours for my driving time. does anyone know a site on the net where i can get them all , or a local truckstop within 40 miles off consett where i can travel to to get them thank you lez 
Try CDC either on line or call in.
truckstuff.co.uk/index.cfm?page=168
… just a thought.
I take it you are a new driver who has recently passed a driving test and been taught to drive the proper way so…
Why oh why do you want to spoil it all by getting an idiot handle 
prideofthefleet.org.uk/
www.roadpro.co.uk
www.truckstuff.co.uk
www.lorrybits.com
www.truck-king.co.uk
EBAY
but, don’t bother with the wheel knob - they’re a waste of time and very good for breaking your thumb 
but, don’t bother with the wheel knob - they’re a waste of time and very good for breaking your thumb
OR your wrist - they are only good for tight yard work but not on the road - I always removed them if one was fitted to a lorry that I was to drive - just try feeding the wheel with one of them things on - not safe IMO
Mothertrucker:
… just a thought.
I take it you are a new driver who has recently passed a driving test and been taught to drive the proper way so…
Why oh why do you want to spoil it all by getting an idiot handle
hi mothertrucker and rog and co, no i have,nt passed my test yet but will in late feb, as im always confident, if i do fail ,i,ll bang straight back in for it its only so many weeks away. i have a guarenteed job start soon as im through so i thought i might as well buy stuff beforehand. i will take your advise and not bother with knob, anymore suggestions where i can get stuff got a good link off mothertrucker CDC thank you
gothika:
i need truckers atlas, steering wheel aid( knob for one hand turning)
need a voltage dropper from 24 volts down to 12 volts. need a timer stop clock big time for 4 and a half hours for my driving time. does anyone know a site on the net where i can get them all , or a local truckstop within 40 miles off consett where i can travel to to get them thank you lez
The timer you can pick up from Fenwick in Newcastle probably cheaper than a truck-stop or several other place that supply kitchen accessories
Also a good book shop ie Waterstones in Newcastle you will be able to pick up a good road atlas have a look to see which one you prefer
Hope that is close enough for you sorry cant really help with Durham or Sunderland or you could go to the Metro Centre there is also Borders at Team Valley retail park
animal:
gothika:
i need truckers atlas, steering wheel aid( knob for one hand turning)
need a voltage dropper from 24 volts down to 12 volts. need a timer stop clock big time for 4 and a half hours for my driving time. does anyone know a site on the net where i can get them all , or a local truckstop within 40 miles off consett where i can travel to to get them thank you lezThe timer you can pick up from Fenwick in Newcastle probably cheaper than a truck-stop or several other place that supply kitchen accessories
Also a good book shop ie Waterstones in Newcastle you will be able to pick up a good road atlas have a look to see which one you prefer
Hope that is close enough for you sorry cant really help with Durham or Sunderland or you could go to the Metro Centre there is also Borders at Team Valley retail park
cheers m8
Sorry not sure about the dropper you could start at Durham services there garage used to be ok
gothika:
i need truckers atlas, steering wheel aid( knob for one hand turning)
Glad to see that you’ve decided aginst the knob mate.
I agree with everbody who has posted advising you against them.
I had trouble finding a decent truckers atlas, had to get WH Smith to order one in for me specially.
They are widely available, just not where I was looking! 
Best of luck with the test but before you get too carried away,
read THIS THREAD and there have been a few other similar ones over the years if you search back.
One for “Diesel dave” With ADR regs etc. is it legal for a driver to take out on the public roads an ADR / Haz load if he / she is not qualified to ADR/ Haz, but has a second man / attendant with them who is qualified
I was always under the impression that “The driver” is the person responsible for the load and the vehicle so the driver should be the one who must be qualified to the required ADR / Haz standard and not the “Attendant / second man”.
There are plenty of decent book shops around that have atlas you could also try LD Mountain Centre on Dean st Newcastle
Maplins in Newcastle or Metro Centre may have your inverter that you want
Hop this helps
NEJ:
One for “Diesel dave”
There is a dedicated thread for direct questions to Dave.
The purpose being that 1. It means he doesn’t have to read everything. and 2. He’s not answering the same question multiple times and, I have a feeling that this question has already been answered. 
copy n paste this into ebays search…I got one of these 
All Ride 24v to 12v 8amp converter dropper truck lorry
Good luck with your test
Nige
NEJ:
One for “Diesel dave” With ADR regs etc. is it legal for a driver to take out on the public roads an ADR / Haz load if he / she is not qualified to ADR/ Haz, but has a second man / attendant with them who is qualifiedI was always under the impression that “The driver” is the person responsible for the load and the vehicle so the driver should be the one who must be qualified to the required ADR / Haz standard and not the “Attendant / second man”.
Hi NEJ, I’ve answered that question HERE for you
Watch out for the new edition of the truckers atlas as a lot of people it seems, have found that there are pages missisng around number 23 to 28 I believe.
Mothertrucker:
Watch out for the new edition of the truckers atlas as a lot of people it seems, have found that there are pages missisng around number 23 to 28 I believe.
thanx mothertrucker i seen that in another post by the way guys and girls i found a good site which i ordered my stuff from heres link roadking.co.uk/
Krankee:
Best of luck with the test but before you get too carried away,read THIS THREAD and there have been a few other similar ones over the years if you search back.
yes m8 i know and thanx for the link, i want everything i need for starting work.
more i read the more im learning thanx to you all