Does anyone know how to adjust the spoiler on an Actros? I would like it lower. It looks like it’s already at the lowest point, but there’s a wacking great gap and it’s higher than the trailer most of the time
That won’t go any lower unless you can find a 9 foot bridge! It’s at it’s lowest setting. As an aside, what height trailer are you pulling?
the maoster:
That won’t go any lower unless you can find a 9 foot bridge! It’s at it’s lowest setting. As an aside, what height trailer are you pulling?
4m trailer.
I’ll try and measure the unit soon.
You’d ordinarily loosen the bolt on each side and drop it down a notch or two but as maoster says its already down at its lowest point by looks of it.
toonsy:
You’d ordinarily loosen the bolt on each side and drop it down a notch or two but as maoster says its already down at its lowest point by looks of it.
Yes, that’s what I figured.
Just wondered if there was another adjustment point that would close up the gap.
The bridge in question was 4m or 14’0" which doesn’t compute!
That is as low as it will go.
Had the same problem on a 71 plate Gigaspace
Ken.
Doesn’t seem to be a right lot of adjustment available. Doubt it would go high enough for a DD.