can some one please go through the steps from 1 to what ever when using your digi tacho card ive never used mine in action as yet. ive read the siemens pamphlet off the net but could any one just list the actions on wot to do ie
get in cab put card in slot 1 i know that much !! does the ignition have to be on for it to work ? etc id be most grate full for any help. and no sarcastic replies please !!! go waste yur breath on some one else !!! im here for help not sarcasam !!!
Yes, the ignition must be on to insert/remove the card, as well as changing to rest/ other work status.
You cannot set off until you see what looks like a petrol pump symbol. next to the status symbol (Work, Rest etc.) in the bottom corner of the screen.
The only other thing to remember is switch your status to rest before pressing the eject button to remove your card. Then, as in the previous link it will count down in bars, ask your finish country (Y or N) and if you are working 24 hrs (Y or N).
Y or N is changed by pressing the UP & DOWN arrows. Press OK to confirm your selection.
Pointman:
and if you are working 24 hrs (Y or N).
I’m pretty sure that that question is actually “do you want a printout of the last 24 hours’ activity?”.
Hello MrFlibble, I am not sure !
It certainly doesn’t mention printout, just: " 24hrs working ?", thats all it says on screen.
I cannot remember the manufacturer of the digi-tacho, but next time I am working for Argos, then I will check.
Check this link, go to page 4, and look at the fifth box down - is this the question you’re referring to? If so, it’s asking you if you want a 24-hour activity printout.
Ah, cheers MrFlibble.
I have only had a brief explanation of what to do with my card, and I was certainly not told to do that to get a printout.
I now know. Thanks