drawings from past to future

[bma.finland]

got a bit overheated maybe , cheers benkku

[ERF-NGC-European]

atki custom.jpg

got a bit overheated maybe , cheers benkku

Superb! Now why didn't Atkinson think of that? Those Borderers (or Defenders, if the drawing shows a 6x4) were no competition for the Europeans in the early to mid '70s; but if they'd done as Benkku so neatly draws, we could have had that LHD Euro-spec Borderer (with or without the extra axle) with its Aerodyne-roofed sleeper cab and the usual choice of 8LXB, RR Eagle (the 280 perhaps) or Cummins 290. Alas, they didn't make a LHD version as far as I know.

By sheer coincidence this very morning I revived my Atkinson CLT Krupp cab thread and I wonder in amazement how they got the European attempt so wrong. Have a look at my Seddon-Atkinson LHD 400 thread: they produced a competitive and potentially brilliant truck with a decent cab and 335-bhp with LHD but they didn't bother to offer it as a production model, only as a rare option. Robert

[bma.finland]

not meny in Finland of these ,cheers benkku

[bma.finland]

random picture

[Lawrence Dunbar]

EPSON450.JPG

random picture

Random, But very nice , Keep them rolling "bma.finland", I envy your great talents my friend, You are a genius with you artwork, Regards Larry.

[bma.finland]

thanks, Larry. this is testdriving the Bedford J BIG in finland ,whit V8 DD and fuller ,Carryfast on the wheel

[jsutherland]

EPSON450.JPG

random picture

Random, But very nice , Keep them rolling "bma.finland", I envy your great talents my friend, You are a genius with you artwork, Regards Larry.

Completely agree with Larry's comments. Appreciate you sharing them with us.
Johnny

Sent from my SM-G935F using Tapatalk

[bma.finland]

the first picture on here 21 of september 2012,o the time goes by

[pv83]

petter v8.jpg

thanks, Larry. this is testdriving the Bedford J BIG in finland ,whit V8 DD and fuller ,Carryfast on the wheel

Nice one mate!

[bma.finland]

cold cold heart cheers benkku

[Bewick]

petter v8.jpg

thanks, Larry. this is testdriving the Bedford J BIG in finland ,whit V8 DD and fuller ,Carryfast on the wheel

Now this is all you want bma., "CF" posting on your site First of all he will give you lessons on how to draw correctly !! and point out where you are going wrong with your pencil ! Then he will tell you how much better the DD engine is than the Scania and Scania made a big mistake by not fitting the DD engine ! Cheers benkku Dennis.

[jsutherland]

003.jpg

the first picture on here 21 of september 2012,o the time goes by

Great drawing!

Sent from my SM-G935F using Tapatalk

[bma.finland]

Well No Dennis ,think we can tis on our own

[jsutherland]

EPSON141.JPG

Well No Dennis ,think we can tis on our own

Another beauty! Do you live near a fishing port? I remember watching the lorries loading up in Scotland at fishing ports when I was a wee laddie.

[bma.finland]

yes in the acipelago of turku finland

[jsutherland]

One top picture

Sent from my SM-G935F using Tapatalk

[bma.finland]

land @sea love them bouth

[Bewick]

Pillaging over for the season so I have lifted the Ship out of the water and taking it to dry undercover storage for repairs and re varnish ready for new season in 2018 Cheers benkku Dennis.

[bma.finland]

not yet Dennis ,i have a hangover cheers Benkku

[Carryfast]

189_189_00.JPG

Pillaging over for the season so I have lifted the Ship out of the water and taking it to dry undercover storage for repairs and re varnish ready for new season in 2018 Cheers benkku Dennis.

Blimey Bewick that ain't big enough for any self respecting pillager.You'll only get as far as Liverpool with that and they've got nothing worth nicking and probably won't even make it across the Solway to nick some malts off the Scottish on a good day.

This is a real one.Around 5m wide and 23 m long.

http://www.khm.uio.no/english/visit-us/ ... dship.html

[bma.finland]

back to bizz carryfast, cheers

[Bewick]

189_189_00.JPG

Pillaging over for the season so I have lifted the Ship out of the water and taking it to dry undercover storage for repairs and re varnish ready for new season in 2018 Cheers benkku Dennis.

Blimey Bewick that ain't big enough for any self respecting pillager.You'll only get as far as Liverpool with that and they've got nothing worth nicking and probably won't even make it across the Solway to nick some malts off the Scottish on a good day.

This is a real one.Around 5m wide and 23 m long.

http://www.khm.uio.no/english/visit-us/ ... dship.html

Only difference "CF" is that my one floats ! Yours doesn't mate !

[Carryfast]

This is a real one.Around 5m wide and 23 m long.

http://www.khm.uio.no/english/visit-us/ ... dship.html

Only difference "CF" is that my one floats ! Yours doesn't mate !

Being able to float on Lake Windermere doesn't cut it.

http://www.youtube.com/watch?v=mkMVsNEwvX0

http://www.youtube.com/watch?v=XORSpUUy0lQ

Doubt if that lack of free board could handle a proper Atlantic swell without getting swamped though.

http://www.youtube.com/watch?v=XS-KZXiV8DQ

[Bewick]

img906.jpg

not yet Dennis ,i have a hangover cheers Benkku

Probably best used for fishing benkku ! not much good for pillaging not much space for the plunder, lager beer maybe, but you would be drunk by the time you hit the beach which would probably be up-side down with no oars Cheers benkku Dennis.

[ERF-NGC-European]

Have you missed a trick, CF? This drawing was posted about 14 postings up the page in your honour and I notice you haven't responded!

petter%20v8.jpg (57.99 KiB) Viewed 1245 times

[Carryfast]

Have you missed a trick, CF? This drawing was posted about 14 postings up the page in your honour and I notice you haven't responded!

petter%20v8.jpg

Unlike the Guy sadly even with the most optimistic what could have been will a 6 wheeler 8 v 71 powered Bedford Big J with a Fuller was never going to happen because absolutely nothing would fit.

But if bma could only get that CV12 powered classic Pete with Rolls grille done.

[bma.finland]

The attachment img282.jpg is no longer available

not yet Dennis ,i have a hangover cheers Benkku

Probably best used for fishing benkku ! not much good for pillaging not much space for the plunder, lager beer maybe, but you would be drunk by the time you hit the beach which would probably be up-side down with no oars Cheers benkku Dennis.

got a bigger on too,it has a 8 potgardner for helpengine ,goes nice cheers Benkku

[Bewick]

img282.jpg

img906.jpg

not yet Dennis ,i have a hangover cheers Benkku

Probably best used for fishing benkku ! not much good for pillaging not much space for the plunder, lager beer maybe, but you would be drunk by the time you hit the beach which would probably be up-side down with no oars Cheers benkku Dennis.

got a bigger on too,it has a 8 potgardner for helpengine ,goes nice cheers Benkku

Spot on bma. and if that is "CF" approaching in that "wee fishing smack" can I suggest that you rev the 8LXB up and tack to "port"? but don't forget to throw him a Life belt Oh! and it isn't far to shore is it Cheers benkku Dennis.

[bma.finland]

robert got a better one of the Rolls now cheers benkku

[ERF-NGC-European]

rolls lorry.jpg

robert got a better one of the Rolls now cheers benkku

Ah-ha! You have revived the Rolls Royce Eagle-engined long-hauler with the Motor Panels sleeper and 9-sp Fuller - brilliant! Robert