Franglais:
Road2ruin:
I haven’t had time to look properly, but it looks like you used ferry mode incorrectly. You turned it off at 01.13, when you should have turned it off after your rest at 09.something.
Ferry mode is like a switch, you turn it on when you park up at the port and start your rest, you turn it off when you finish your (correctly allocated) 11 hrs rest. There should be no more than 1 hour foe two vehicle movements to get on and off and the rest period has to be a minimum of 11 hours. As far as I am aware there is no stipulation on the length of the ferry journey.You stop in port and select rest.
When time to move onto boat, select ferry and make move. (This is the first interruption allowed by ferry mode rules, it ends when rest is selected as follows)
When stopped on boat select rest again.
When time to move off boat, select ferry mode. (this is the second interruption) and move off boat.
When stopped select rest again.
The two interruptions should be less than 1 hour total.This seems to be what Old John has done, and is correct.
That’s not the way the one on my new Siemens smart tacho works. If I can work out how to upload a picture I will show a printout.