cracked scania wheel rimModerators: Reef, Denis F, Mike-C By posting content to TruckNet, you're agreeing to our terms of use and confirm that you have read our Privacy Policy, and our Cookie Use Policy. You acknowledge that any personal data you post on TruckNet may be accessed by other members of TruckNet and visitors to the forum
26 posts
• Page 1 of 1
cracked scania wheel rimwas out in a 15 plate scania tonight and had a slow puncture on the o/s front so called out the tyre guy.he took the wheel off and got his soap spray out and the rim was cracked where the centre fits to the rim. he said its not uncommon on these and hes seen it on 68 and 69 plate scania too.....should we be worried???
Re: cracked scania wheel rimNot at all I've had that with a volvo and mercedes.
Jail the Dozy 1 (he had us all fooled)
Bring the Beaver back ASAP
Re: cracked scania wheel rimHad 2 on my Merc in just over 2 years. Been told its common on the Merc also
Hauling double deckers the length of Britain
Bit of a Twitterer @truckerjoe82
Re: cracked scania wheel rimCrap recycled steel, and manufacturers trying to save weight by making wheels thinner.
Pick-up a wheel from an 80's F10 then pickup a wheel from Fh4.. Also recycled steel corrodes faster than 1st quality steel, I do have a home to go too
Re: cracked scania wheel rimPretty sure scania and Volvo and all manufacturers use buy in wheel rims and tyres from other companies so any of them could get a bad batch
![]() ![]()
Re: cracked scania wheel rimThe proportion of recycled material in steel doesn`t affect it`s quality.
Steel made to differing specs, with different prices, will be of different quality, but the amount of recycled content isn`t really relevant.
Re: cracked scania wheel rimA lot of the problems is heating then cooling overtime it weakens them
Sent from my SM-G950F using Tapatalk
Re: cracked scania wheel rim
I'm sure from when doing metal work, engineering, we was told, the more steel that is used as it's heated and melted down, it losses carbon content, and other changes within it's structural make-up. Making it weaker.. There's different processes for different qualities... I do have a home to go too
Re: cracked scania wheel rim
But when steel is recycled it is melted down, the carbon and other ingredients can be adjusted. Generally the steels available today are better quality than previously, both because of a better understanding of materials science, and also from better control of the processes. If sub-standard materials are being used, it is a failure of the truck maker or supplier in their quality control methods, of someone speccing a cheaper material to save cost, or someone speccing a lighter material to save weight. I do agree that there is plenty of scope for failure, but I don`t agree that it`s down to the use of recycled content in the steel. It may be poor quality steel, but that isn`t down to recycling content.
Re: cracked scania wheel rimMolecular structure of the metal has broken down.....
![]()
Re: cracked scania wheel rimhttp://www.eurofer.org/Sustainable%20St ... ling.fhtml
"Steel is 100 per cent recyclable. It can be reused over and over again without any loss of quality. Scrap is therefore a valuable raw material for steel production."
Re: cracked scania wheel rim
Scrap was always part of the charge loaded into steel furnaces, years ago I spent time in Sheffield steelworks laboratories testing samples from open-hearth and electric furnaces, quality was checked with care,whatever the feed to the furnace consisted of.
Re: cracked scania wheel rimMight just be down to the usage of the individual vehicle.
Are the roads of today more rougher and potholed than those of yesteryear, or is that the rose tinted glasses viewpoint? And has anyone noticed this with trailer wheels? Faith, trust, and a little bit of pixie dust!
Re: cracked scania wheel rimI had both my front rims cracked within weeks of each other on a daf 105 xf a while back
Re: cracked scania wheel rimHad the exact same thing on a Daf XF 65 plate on Friday.
Sent from my SM-G903F using Tapatalk Here today, there tomorrow and somewhere in between.
Re: cracked scania wheel rimJust chain the dodgy one up and crack on. She'll steer OK with one wheel.
I'll fix that later.
Re: cracked scania wheel rimchances are its chinese steel once again. my bro who works in engineering near Paris was telling me the chinks go to great lengths now to hide the origins of their finished steel, such is the bad name it now has.
suffolk coast
Re: cracked scania wheel rimWhoops!
Re: cracked scania wheel rim
Would the snowflake/plobbers, and Trucking Legends know how to do that, I don't remember that syllabus whilst doing my CPC I do have a home to go too
Re: cracked scania wheel rim
Worked for the Scammell Scarab well enough! ![]()
Re: cracked scania wheel rim
![]() I'll fix that later.
Re: cracked scania wheel rimI wonder if its driving over the pot holed mess our roads/motorways are now is causing things to crack and fall apart.
![]() Last edited by Dodgy Permit on Mon Feb 17, 2020 1:56 pm, edited 1 time in total.
Re: cracked scania wheel rim
Think I might have posted this before. N/S front wheel off my FM unit a few years ago. It gave up com I g off a roundabout.
Re: cracked scania wheel rim
Blimey that could have been really nasty. I'll fix that later.
Re: cracked scania wheel rimI am shocked
Re: cracked scania wheel rim
" Our Lorry's lighter than yours na na na na and doesn't it look so so cooool and SEXY too" . Poxy marketing men.
By posting content to TruckNet, you're agreeing to our terms of use and confirm that you have read our Privacy Policy, and our Cookie Use Policy. You acknowledge that any personal data you post on TruckNet may be accessed by other members of TruckNet and visitors to the forum
26 posts
• Page 1 of 1
Return to THE UK PROFESSIONAL DRIVERS FORUM (INTERACTIVE) Who is onlineUsers browsing this forum: adam277, Franglais, gkdsp, harry_gill, remy, Riho, RIPPER, stargazer148, the maoster, whiplash and 113 guests |