Digital error codes

I have been looking for a list of Digital Tachograph error codes as I had an error code 50 during start of shift procedure yesterday.

What is a code 50, and where to find a list of others that might appear?

hope this helps;

EVENT CODES

General events;

00 No further details
01 Insertion of non valid card
02 Card conflict
03 Time overlap
04 Driving without an appropriate card
05 Card inserted whilst driving
06 Last card session not correctly closed
07 Overspeeding
08 Power supply interruption
09 Motion data error

Vehicle Unit related security breach attempt events;
10 No further details
11 Motion sensor authentication failure
12 Tachograph card authentication failure
13 Unauthorised change of motion sensor
14 card data input integrity error
15 Stored user data integrity error
16 Internal data transfer error
17 Unauthorised case opening
18 Hardware sabotage

Sensor related security breach attempt events;
20 No further details
21 Authentication error
22 Stored data integrity error
23 Internal data transfer error
24 Unauthorised case opening
25 Hardware sabotage

Recording equipment faults;

30 No further details
31 VU internal fault
32 Printer fault
33 Display fault
34 Downloading fault
35 Sensor fault
Card faults;

40 No further details

Manufacturer specific;

80 Upwards
Reason for event / fault record;
00 One of the 10 most recent (or last) events or faults
01 The longest event for the last 10 days of occurrence
02 One of the 5 longest events over the last 365 days
03 The last event for one of the last 10 days of occurrence
04 The most serious event for one of the last 10 days of occurrence
05 One of the 5 most serious events over the last 365 days
06 The first event or fault having occurred after the last calibration
07 An active / on-going event or fault
80 onwards Manufacturer sprecific

I know that event / fault ‘50’ is not shown there, but it’s not in the VDO or Stoneridge books either.

geebee45 thanks for your useful reply.

Not sure if the error code was connected to fact that I was first to use vehicle after it had been in workshop.

According to VDO; error code 50 is due to a card fault. It could be down to one of several things;
you’ve put the card in the wrong way round :open_mouth:
the card has expired :angry:
the card validity date has not been reached :smiling_imp:
the chip in the card is damaged and the Vehicle Unit cannot read the data, the advice was try it in another vehicle if possible. If all else fails, declare it faulty and send it back to DVLA. If they find the chip faulty, they’ll free issue a replacement. Don’t forget to use Recorded Delivery and keep printouts whilst waiting for the new card :astonished:

The best one I saw was in this weeks Motorcycle News.

The Digital Display simply said t WAT :stuck_out_tongue: It means check water temperature :smiley: