3300John:
Hiya …Robert the reason that the 4MW was on 6x4 chassis is because of the overhaul length,
i remember the front bumper bar should have been on the front end of the chassis of the A series
but that put the overall length over the limit. so ERF put the bumper under the chassis with the exposed
front cross member. the 4 MW isn’t a set forward axle its the 5MW is a set back axle. the 5MW cabbed
chassis has longer springs that give a better ride. i,am sure i,am correct with that. thats why the rear set
front axle A series chassis was such a good the ride and was not to hard like earlier models…
Ah-ha! Well explained John; thank you for that, it all makes much more sense now!
By the way, here’s a LHD MV to throw into the melting pot. Robert
