Hi, i am hoping you guys can help me. I have a Daf lf 45 truck that cranks but wont start. It is throwing up the following codes,
Code 651.5
Measured current strength from cylinder 1
injector (B131) is too low. This is the current
between pins C09 and C13 of the ECU,
caused by:
-interruption in injector wiring
-bad connection point at injector
Code 653.5
Measured current strength from cylinder 3
injector (B133) is too low. This is the current
between:
BE: pins C11 and C16 of the ECU,
CE: pins C04 and C12 of the ECU,
caused by:
-interruption in injector wiring
-bad connection point at injector
I was told to buy injectors, but before doing so i wanted to get some of your views before i go onto buy the injectors. On its last trip, the truck seemed to be on limp mode as it was doing a maximum of 40kms.
Please any help or advice will be much appreciated. The truck is in Africa.