Maybe one of you guys have come across this before
I have a 2011 Renault premium 460 dxi. On startup the fault “water in fuel bleed in menu” comes Up. When you go into menu and select bleed water I can see and hear the process happening and the fault goes away. However as soon as you switch off and restart it comes Back on again.
I’ve replaced all the fuel filters and fitted a new water trap sensor and bleed motor housing but it’s still the same. Any ideas?
Is it actually bleeding any water out, You should be able to see it, mine drains it out under the engine onto the floor
Maybe a blocked drain tube, or a lot of water getting in there
Hi yes it is bleeding ok, I can see the fuel flow out from bottom of the bowl.
Has also tried to clear the fault using a texa machine but keeps popping back up